Toshiba DKT2004-CT - Manual (Page 21)

Installation
Connect and Apply Power to Base Unit
Strata DKT2004-CT Cordless Digital Telephone 9/00
9
1. Plug the AC adapter cord into the AC adapter input jack on the base unit.
CAUTION! Use only the AC adapter supplied with your cordless digital telephone.
2. Plug the AC adapter into a standard
120 VAC wall outlet.
3. Route the power cord where it is not
a trip hazard, and where it cannot
become chafed and create a fire or
electrical hazard.
4. Wrap the power cord around the
notch on the bottom of the base unit
as shown at the right.
5. Check to see that the power LED is
on, indicating the telephone has
power.
Line Out
to DKT
Modular
Cords AC Adapter
1145
Line In to Digital Telephone Circuit
(DK14 KSU or DK40 Base KSU, KCDU,
PDKU2, RDSU)
1175