Toshiba DKT2004-CT - Manual (Page 20)

Installation
Connect Telephone Cords
8
Strata DKT2004-CT Cordless Digital Telephone 9/00
Step 2: Connect Telephone Cords
Your cordless digital telephone can be used as a stand-alone telephone or in
conjunction with your deskset.
There are two telephone line jacks on the back of the base unit of your cordless digital
telephone: “Line In” and “Line Out.” You can connect your cordless digital telephone
to both the telephone line and a Strata DK digital telephone.
➤
To use as a stand-alone telephone
➤
Connect the modular jack labeled
“Line In” to the telephone wall jack.
➤
To use with a desk telephone
1. Unplug the telephone line cord from
your desk telephone.
2. Connect this cord to “Line In” of your
cordless telephone.
3. Using the two foot modular cord that
came with your cordless telephone,
connect the jack labeled “Line Out” to
the desk telephone.
Step 3: Connect and Apply Power to Base Unit
Note The AC adapter furnished with this telephone may be equipped with a
polarized line plug (a plug having one blade wider than the other). This plug
fits into the power outlet only one way. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug still does not fit, contact
your facilities coordinator about replacing the obsolete plug. Do not alter the
shape of the blades on the polarized plug.
AC Adapter
Wide
Blade
1174