Toshiba DKT2004-CT - Manual (Page 93)

Features
Two (Tandem) Line Connection
Strata DKT2004-CT Cordless Digital Telephone 9/00
81
Using Line Buttons
This feature enables a station user to connect two lines, then drop out of the
conversation. Both
/LQH buttons (or 3RROHG /LQH *US buttons) must appear on your
telephone to allow tandem connection to be established from your telephone.
➤
To connect two outside lines using the Line button
1. Press &QI7UQ while on a
line call.
After you press the button, you hear dial tone, the
Line LED flashes at the conference rate. The new
Line LED lights steady.
2. Press another /LQH button
and dial a telephone
number.
The Line LEDs light steady and all parties are
conferenced.
3. Press &QI7UQ after the
party answers.
...or return to the original
call if you receive a busy
tone/no answer by
pressing the original
/LQH
button.
4. Press &QI7UQ . You hear dial tone.
●
The Line LEDs flashes at the exclusive hold
rate and the LED lights steady.
●
Both Line LEDs continue to flash at the
exclusive hold rate and the two lines are
connected. The LED turns off.
5. Press 7$/. . If the public telephone company provides auto
disconnect, the connection may release
automatically when the parties hang up. If not,
the lines must be supervised to be disconnected
(See the previous “Supervision” instructions).