Toshiba DKT2004-CT - Manual (Page 77)

Features
Message Waiting
Strata DKT2004-CT Cordless Digital Telephone 9/00
65
➤
To set a Message Waiting light on another telephone
➤
To cancel a Message Waiting light on the other telephone set from your telephone
...or press 7$/. +  . The Msg indication cancels without calling the
telephone or VM device which set the Msg
indication on your telephone.
1. Press a [DN] and dial a
[PDN] or a [PhDN].
You hear ringback tone or busy tone.
2. Press 0VJ or press 
while listening to the
ringback or busy tone.
The Msg LED associated with the dialed number
flashes at the called telephone. The Msg LED
lights steady at your telephone.
●
If you dialed a [PDN], the LED of the fixed
0VJ button flashes.
●
If you dialed a [PhDN] and that station has a
0: button specifically associated with the
[PhDN], then that button’s [PhDN/MW]
LED flashes. If the called station does not
have a
[PhDN/MW] button, then dial the
[PDN] to leave a message.
3. Press 7$/. . The Msg LED continues to flash at the called
telephone, until the called party retrieves the
message by pressing the Flashing (fixed)
0VJ
button or the [PhDN/MW] . After setting a
message waiting indication on another telephone,
the Msg LED turns off at your station after you
press
7$/. .
1. Dial the station number on
which you left the
indication.
2. Press 0VJ twice or press
 twice.