Topcom BUTLER Quattro User Manual
Page 11
Topcom Butler 3450/Twin/Triple/Quattro
11
Topcom Butler 3450/Twin/Triple/Quattro
ENGLIS
H
5.7
Setting the volume
During a conversation you can set the volume by pressing the Volume button
. You can
set the volume alternatively in Hi, Medium and Low.
5.8
Paging
When you press the Paging button on the base unit, the handset emits a ringing signal for
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9
Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
•
Press and hold the redial button
for 3 sec.
•
The display will show:
‘S’ for 100ms
or ‘L’ for 250ms
•
The flash time setting will disappear after 2 sec. from the display
5.10 Setting the ring volume and melody
5.10.1 Handset melody
•
Press and hold the melody button until the current melody is heard.
•
Select the desired melody (1-9) by means of the scroll keys
or by entering a
number (1 - 9).
•
Press again to confirm the setting
5.10.2 Handset ring volume
•
Press the volume button
in standby
•
The handset will ring in the current volume
•
Press 1-5 or use the scroll keys
to select the desired volume
•
Press ’0’ to turn the volume OFF
The hands free receiver volume is also adjustable as above described!