Topcom BUTLER Quattro - Manual (Page 19)

Topcom Butler 3450/Twin/Triple/Quattro 19
Topcom Butler 3450/Twin/Triple/Quattro
ENGLIS
H
• Press the key to confirm the day.
• The internal voice will ask you to set the hour.
• Press a few times on or keys to set the hour.
• Press the key to confirm the hour.
• The internal voice will ask you to set the minutes.
• Press a few times on or keys to set the minutes.
• Press the key to confirm the minutes.
The complete day and time setting is then repeated for confirmation.
9.8 Checking Day/Time
• Press the key to announce the day/time. The internal voice will say the current day/
time setting.
9.9 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see Remote
Operation). The VIP code is set to '321' by default.
9.9.1 Changing the VIP Code
•
Keep the - key pressed down for 2 secs to change the VIP code.
• The internal voice asks you to set the VIP code and says the first number.
• Press a few times on or keys to set the first number of the VIP code.
• Press the key to confirm the first number. The internal voice says the current set 2nd
digit of the VIP code.
• Press a few times on or keys to set the second digit of the VIP code.
• Press the key to confirm the second number. The internal voice says the current set
3rd digit of the VIP code.
• Press a few times on or keys to set the third digit of the VIP code.
• Press the key to confirm the VIP code. You will hear a long beep. The internal voice
says the new VIP code for confirmation.
• If you do not press any keys for 8 seconds, the previous day/time
setting is saved and the machine automatically exits the day/time
setting mode.
• When you use the machine for the first time and have not yet set the
day/time, no day/time registration of incoming messages is recorded.
• If there is a loss of power to the base, the day/time must be re-entered.
If there is a loss of power to the base, the VIP code will revert to '321'.