Topcom BUTLER Quattro - Manual (Page 13)

Topcom Butler 3450/Twin/Triple/Quattro 13
Topcom Butler 3450/Twin/Triple/Quattro
ENGLIS
H
6.2 Consulting the Call list
• Press the Call Log button . The last received call is shown on the display. If the list is
empty, ‘NO CLIP’ is shown on the display.
• The following will be shown on the display:
• After 5 seconds, the telephone number will be shown. You can skip the date/time by
pressing the
button.
• Use the left scroll key to scroll to the previous call. Use the button to show the
next call.
• You can leave the Call list by pressing the button.
* Only when the network sends the time/date together with the telephone number!!! On
some networks with caller ID, time and date will not be displayed
6.3 Calling a number from the Call list
• Scroll through the Call list until the desired number is shown on the display.
• Press the Line button . The number will be dialled automatically.
6.4 Erasing a number from the Call list
• Scroll through the Call list until the desired number is shown on the display.
• Press and hold the Mute button for 3 sec. to erase the number.
6.5 Store a number from the call log into the memory
• Scroll through the Call list until the desired number is shown on the display.
• Press and hold the Memory button for 3 sec.
• Enter the memory location (0-9) where you want to store the number
• Enter the Memory button again to confirm and to go back to standby
7 Register/de-register a handset
7.1 Register to a Topcom B3450 base
You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as
handset 1 on the base unit upon delivery (base unit 1).
Date (DD-MM) *
Progress number Time (24h format) *