Thermador P24WK - Manual (Page 16)

FINAL CHECK LIST
❑ Cooktop correctly positioned
and anchored in countertop
recess.
❑ Specified clearances main-
tained to cabinet surfaces.
❑ Unit Level – front to back –
side to side.
❑ Burner caps positioned prop-
erly on sealed burner bases.
❑ All packaging material re-
moved.
❑ Backguard attached (if hori-
zontal clearance to combus-
tible materials behind cook-
ing surface is less than 12").
❑ The stainless steel radiant
and porcelain grill grate is in
place (not all models).
❑ The griddle plate and frame
is correctly positioned, tilted
slightly forward. (See page 8
for adjustment procedure.)
INSTALLER CHECKLIST
OPERATION
❑ All internal packing materials
removed. Check below
grates and grill pans.
❑ Burner caps properly seated
into burner bases.
❑ Grill components properly
seated (not all models). Re-
fer to Care & Use Manual for
Grill details.
❑ Bezels centered on burner
knobs, and knobs turn freely.
❑ Each burner lights satisfac-
torily, both individually and
with other burners operating.
❑ Air Shutter adjustment for
proper flame made for the
Grill. See Fig. 13.
❑ Griddle is tilted slightly for-
ward and does not rock (not
all models).
❑ Burner grates correctly posi-
tioned, level, and do not rock.
GAS SUPPLY
❑ Connection: 3/4" NPT with a
minimum 3/4" diameter flex
line.
❑ The appliance is connected
only to the type of gas for
which it is certified for use.
❑ The pressure regulator
(shipped with unit) has been
connected to the manifold and
is set for 5" W.C. for natural
gas or 10" W.C. for propane.
❑ Manual gas shut off valve in-
stalled in an accessible loca-
tion (without requiring removal
of appliance).
❑ Unit tested and free of gas
leaks.
❑ Gas supply pressure does not
exceed 14" W.C.
ELECTRICAL
❑ Polarized and grounded
120VAC, 10 Amp receptacle
with 10 Amp over-current pro-
tection is provided for service
cord connection.
❑ For models with electric griddle
(PC364GE, PC486GE, and
PC484GGE), a polarized and
grounded 120VAC receptacle
with 15 AMP overcurrent pro-
tection is provided for service
cord connection.
14