Thermador P24WK - Manual (Page 9)

Detail B – See FIG. 9, above
Suggested Regulator Installation
Installation Options
gas flow
­
gas flow
­
GAS SUPPLY REGULATOR
Make sure gas
regulator is horizontal
after installation
Installation Option 1. From Shut-off Valve
3/4"
nipple
Wall
3/4" flex
adapter
Regulator
3/4"
flex
line
3/4"
Manifold
flex
adapter
Manifold
3/4" Manifold
nipple
3/4" x 3/4" x 3"
Street
Ell 3/4"
Regulator
Installation Option 2. From Manifold
3/4" flex
adapter
3/4"
flex
line
3/4" flex
adapter
Shut-off
Valve
Shut-off
Valve
Step 2: Cabinet Preparation
3/4 "
NPT
Inlet
3/4 "
NPT
Outlet
Gas Flow
­
® ®
FIG. 9
3"
Min.
36"
Power
Cord
3/4" flex line
3-Prong grounding type
receptacle connected to
a properly grounded and
polarized electrical supply
rated at 120VAC, 10 Amps,
( or 15A*) Single Phase,
60 HZ.
V
Product Rating
Label/Serial Tag
All Installer supplied parts must
conform to Local Codes.
A manual valve must be
installed external to the
appliance, in an accessible
location from the front, for
the purpose of shutting off
the gas supply.
Regulator (sup-
plied with unit)
Install horizontally,
See Detail B,
Below.
Front - Bottom of Unit, See Detail B, Below
Threading compounds
must be resistant to
Propane Gas
V
V
V
V
V
gas flow
­
V
P24WOK 1/2" NPT
7
*15 Amp electrical supply
required for models PC364GE,
PC486GE, and PC484GGE.
Note: The PC304 30" cooktop
includes an internal gas supply
regulator.
*See important note below
*IMPORTANT: For the PC304 model,
install the shut-off valve, flex line and fitting
only - NO regulator. The PC304 model
has an internal regulator. DO NOT IN-
STALL AN EXTERNAL REGULATOR
WITH THE PC304 MODEL.