TacT Audio S2150 - Manual (Page 18)

CAUTION CAUTION
18 Tact Audio
Front Panel Display
Main screen
When the 2150 amplifier is turned ON and the system loading sequence has com-
pleted, the amplifier will display the normal operating main screen.
INPUT: CD/Transport
-17.9 dB Fs= 44.1
3 2
1
1 - Name for input selection
2 - Master level in dB
3 - Input sampling frequency indicator.
Main Screen :
The Main menu of the M/S 2150 has three pages of general menu selections.
<- OPT InOut POL
REM COMM ADDR ->
MAIN menu
<- LOCK GAIN
DELAY LEVEL ADC
CRO TRIG DISPL->
Saving Menu
Settings
Custom settings that are made to any of the menu selections may be saved by
placing the M/S 2150 into standby mode. If you make changes to any of the menu
items and turn the unit off before placing it into standby mode all settings will be lost.
To place the M/S 2150 into standby mode press the red “STANDBY” button on the
remote control.
Main Menu :
The remote control is needed to enter the amplifiers Menu selection pages. Press
the “MENU” button to enter the amplifiers menu section. Use the “LEFT” and
“RIGHT” navigational buttons to highlight an option with the selection cursor and to
proceed to a new page. To enter a highlighted option press the “ENTER” button.
Once you are in a menu option Use the “MENU” button to go back one step (from
sub-menus) or to return to the main operating screen.