TacT Audio S2150 - Manual (Page 27)

27 Tact Audio
The M/S2150 is more than just an amplifier. With powerful features such as level
balancing, time alignment, and assignable electronic crossovers, you can custom-
ize and build the amplifier system that you need, whether your system is biamped,
triamped or more. Each of Tact’s amplifiers employ an RS232 in and out connec-
tion for control from a Tact master controller. Complete instructions for using the
2150 software can be found in the online help available in the software.
Your computer system must meet the following requirements:
- An IBM compatible PC with Pentium 100 MHz, 64 MB Ram & 100 MB
free hard disk space or better
- Microsoft Windows 98, ME, 2000 or XP
- Operating system regional setting must be set to “English(United States)”
- Microsoft Windows-compatible graphics-card and monitor with screen
resolution 800x600 or better
- CD-ROM drive
- Microsoft windows compatible 2- or 3- button mouse
- Standard RS-232 serial port with DB-9 connectors
System requirements
TacT M/S2150 Software
Software Installation Follow the steps below to install the M/S2150 Room Correction Software:
1 - Start windows and insert the TacT software CD into your CD-ROM drive.
2 - Double-click on the “My Computer” icon on the desktop.
3 - Double-click on the CD icon to launch the CD browser.
4 - Double-click on “Tact 2150 vx.x.exe” and follow the instructions.
After the installation you will have the option to launch the M/S2150 software. If
you would like to launch the program at this time when prompted, select “Launch
TacT-2150” and the software will start. You should now see the M/S2150 System
main-screen.
Start The M/S2150
software
To start the software go to the Windows “Start” menu, select “Programs” then
“TacT-2150” and click on the “TacT-2150” icon. You should now see the M/S2150
System main screen.