TacT Audio S2150 - Manual (Page 25)

25 Tact Audio
ADDR menu
(Address)
1 - Address settings.
2 - Active address setting.
Address Menu :
The address menu allows for the setting of the “address” for the unit. The default
address setting is “001”. If multiple amplifiers are used together, different addresses
will allow individual control of each amplifier.
Use the “UP” and “DOWN” navigational buttons to select the desired system ad-
dress and then press the “ENTER” button to select it.
1
CURRENT ADDRESS: 001
ADDRESS: 001
2
1 - Lock code.
2 - Active lock state.
3 - Set button.
Lock Menu :
1
M/S 2150 : LOCKED
PASSWORD : 0000 SET
2
LOCK menu
3
The lock menu allows a lock to be set to prevent entering the M/S 2150 editing
menus and the changing of the selected input without unlocking the 2150 with the
lock code. By default the 2150 is unlocked and all menus can be accessed and
inputs can be changed without entering a lock code. When the unit is locked, the
only menu option that can be entered is the “LOCK” menu to unlock the unit.
Once the lock code is entered you will be able to use the 2150 menus until the
lock code is entered again to lock the 2150.
To lock or unlock the M/S 2150 enter the lock code “1-2-3-4” by using the “LEFT”
and “RIGHT” remote control buttons to select each digit and use the “UP” and
“DOWN” buttons to select the desired number from 0 to 9 . Once the code is en-
tered select the “SET” option and then press the “ENTER” button to unlock or lock
the unit. The active lock state will be displayed in the active lock state portion of
the screen.
Front Panel Display