Uniden XCA750 User Manual
Page 26
Base Operation
1.
Press
l
.
The speaker beeps, and the
Time and Day Stamp is
announced.
Setting Your Outgoing Message (OGM)
When you receive a call, the Answering System answers and automatically
plays either a preset message or your personal Outgoing Message.
Preset Messages
The
XCA650/XCA750
has two message programmed in its memory. If the
REC TIME/ANN/4/1
switch is in either the four or one position, the first
preset message below plays. Incoming messages are limited to four or one
minute respectively. If the switch is set in the left posion. (i.e., the
“Announce On/y”
position) the second message below plays, and no
incoming message are recorded.
.
Hello. No one is available to take your call. Please leave a
message after the tone.
l
Hello. No one is available to take your call.
Recording Your Personal OGM
Handset Operation
1.
Press
The talk/batt low LED lights
green.
2.
Press
Note:
You
can leave up to a
60-second outgoing message.
Note:
If the REC TIME/ANN/4/1 switch is in the “Announce Only” position,
the Message Counter LED displays an A when the system is in
Standby.
45
46