Uniden XCA750 - Manual (Page 36)

Message Full Indication 2. Press
The XCA650/XCA750 has a maximum record time of 20 minutes or up to
40 incoming message. When the memory is full, the Answering System will
not record incoming calls. To return the system to normal operation, follow
these steps.
1. When the memory is full, the
phone will ring 10 times
before the announcement “No
remaining time for incoming
messages” plays.
2. You must review your
messages and then delete
some or all of the stored
messages.
Voice-Guided Help Menu
If you are unsure of the commands available while using the Handset, you
can use the Voice-Guided Help Menu. The Handset commands are
reviewed for you on the Handset Receiver. To access the Help Menu, follow
these steps.
1. Press
The talk/batt low LED lights
green.
A tone sounds, and the
Voice-Guided Menu begins
to play.
3. There are two ways to exit
the Help Menu
press
anytime during the review or
listen to all the options and
wait for the system to
automatically exit.
4. When you exit Help, you will
hear a short tone every three
seconds, indicating that the
system
IS in the Command
Waiting Mode. Press another
command, or press to
return to Standby.
Note: You have 20 seconds
to enter another command
while in the Command
Waiting Mode before the
system automatically returns
to Standby.
When you return to Standby,
the talk/batt low LED goes
Off.
65 66