Specifications, Answering system troubleshooting chart – Uniden XCA750 User Manual

Page 41

Advertising
background image

Answering System Troubleshooting Chart

Specifications

Problem

Suggestion

Answering System does not work.

l

sure that the Base Unit is plugged

l

Make sure the Answering System is

turned on.

Answering System does not answer calls.

Messages are incomplete.

After a power failure, the outgoing message

is deleted.

Message Counter LED flashes the letter P.

No sound on the Base Units eaker during
call monitoring or message p ayback

Cannot access remote call-in features from
another touch-tone phone.

Cannot record outgoing message (ogm).

Clock losses time.

75

76

l

Press the RESET button to reset the

system after an AC line spike.

l

Set the REC TIME/ANN/4/1 switch in

either the 4-mintue or 1 -minute position.

l

The memorv mav be full. Delete some

or

all of the saved messages.

l

The incoming messages may be too long.

Remind callers to leave a brief message.

l

The memory may be full. Delete some or

all of the saved messages.

l

The answering machine has a flash

memory with no battery backup. Record

our personal outgoing message again.

he default messages should still remain.

l

There has been a power failure. Press

RESET to reset the Answering System.

l

Adjust the volume control on the side of

the Base Unit.

l

you’re using the correct PIN

l

Make sure that the touch-tone phone

using can transmit the tone for at

east two seconds. If it cannot. vou mav

have to change to another phone.

l

The memory may be full.

Delete some or all of the saved

l

The power to the base unit has been

interrupted.

Reset the clock as detailed on page 41

of this owner’s manual.

General

Frequency Control

Phase Locked Lcop (PLL) Synthesizer

Modulation

FM

Operating Temperature

-10˚ to 50˚C

Base Unit

Receive Frequency

Transmit Frequency

Power Source

Size

Weight

39.775-40.000 MHz (10 Channels)

30.075-30.300 MHz (10 Channels)

AAD-650U AC Adapter (N14700)
Output: 9V, 350mA DC

Input: 230-240V AC, 50Hz

213 (W) x 140 (D) x 48 (H) mm

Approx. 667 gm

Handset

Receive Frequency

Transmit Frequency

Power Requirements
Size

Weight

Battery

Answering System

memory Type
memory Capacity

Message Length

30.075-30.300 MHz (10 Channels)

39.775-40.000 MHz (10 Channels)

Rechargeable Ni-Cd Battery Pack

56 (W) x 68 (D) x 307 (H) mm

(w/ antenna)

Approx. 353 gm (including battery)

BT-l 61

Capacity

270 mAh, 3.6V

Talk Mode

6 hours

Standby Mode

14 days

Digital Tapeless Recording

20 min. (nominal) (40 messages)

1 min. or 4 min. Incoming Message
(max.)

1 min. outgoing message (max.)

Specifications, Features, and availability of Optional Accessories are all

subject to change without prior notice.

Advertising