Uniden XCA750 - Manual (Page 35)

2. If you decide to delete a
message, press and release
during the
The system beeps and
immediate/y goes to the next
message.
Note: When you press
you are deleting the
message. Once the message
is deleted, if cannot be
replayed.
4. When the “End of messages”
announcement plays, you will
hear a long tone on the Base
speaker.
Note: If less than five minutes
record time remains, the actual
record time remaining for new
messages immediate/y follow
“End of messages” announcement.
2. You will hear three short
tones, followed by a longer
tone.
Note: If you release the
delete button before all three
short tones sound, the
messages are not erased.
Deleting All Messages
You can delete all your messages without deleting each separate message.
To delete all the messages, you must use the delete button on the Base Unit.
1. Press and hold
Note: You must review all
messages before using the
“Delete All Messages”
function.
3. A long tone sounds once the
messages are erased.
Note: The deletion
announcement above
depends on how many
messages are stored in
memory.
63 64