Uniden BEARCAT UBC3500XLT - Manual (Page 35)

35
Basic Operation
called Qck Save Cnv Sys. These are created if they
do not exist. Then, the scanner prompts you to save
other channel settings.
If you pressed No in Step 3, the scanner prompts you
to select the system where you want to store the
frequency.
Quickly Recalling Channels
1. Press Hold to hold on any channel.
2. Press + rcl. The scanner prompts you to
select the system where the channel is stored.
3. Rotate the scroll control to select the system, then
press E. The scanner prompts you to select the
channel group where the channel is stored.
4. Rotate the scroll control to select the group, then
press E. The scanner prompts you to select a
channel.
5. Rotate the scroll control to select the channel,
then press E to hold on that channel.
Toggling Channel Alpha Tags
To change the display so the frequency appear
instead of the alpha tag, press
+ 5.
Func
Func