Uniden BEARCAT UBC3500XLT - Manual (Page 68)

68
• Beep+Light (the scanner beeps and the
backlight turns on when it receives a Close
Call signal)
• None (the scanner does not alert)
Select Beep
• Off (the scanner does not beep)
• Alert 1-9 - (the scanner sounds an alert
beep to notify you of a Close Call hit. When
you select an alert level, the scanner
automatically enters the setting of the Alert
volume level. You can choose different beep
types.)
Set CC Pause: Lets you select how long the
scanner waits after a hit before it returns to the
previous operation.
• 3/5/10/15/30/45/60 sec.
• Infinite.
Turn the scroll control to display an option, then
press the scroll control to select it.
• Set CC Bands: Lets you select the Close Call
band settings. You can turn the following bands
on or off.
VHF Low1 (25.0000 - 53.9875 MHz) Band Plan1
(25.0000 - 53.9950 MHz) Band Plan2
(25.0000 - 53.9937 MHz) Band Plan3
VHF Low2 (54.0000 - 107.9500 MHz)
Air Band (108.0000 - 136.9875 MHz) Air 12.5k
(108.0000 - 136.9916 MHz) Air 8.33k
VHF High1 (137.0000 - 224.9950 MHz)
VHF High2 (225.0000 - 319.9500 MHz)
UHF (320.0000 - 512.0000 MHz)
800MHz+ (806.0000 - 1300.0000 MHz)
Use the scroll control to select a band, press
the scroll control, then use the scroll control to
select On or Off and press the scroll control.
Turning off undesired bands speeds up Close