Uniden BEARCAT UBC3500XLT - Manual (Page 36)

36
Using the Menu The scanner’s menu lets you select options that let
you set up and use the scanner.
To use the menu, press
on the left side of the
scanner. To select a menu item, rotate the scroll
control clockwise or counterclockwise. The currently-
selected menu item is highlighted with a bar on the
display. When the menu item you want to select is
highlighted, briefly press the scroll control to select it.
To back up a level, press
. To exit the menu
mode, press again or the L/O key.
This table shows the scanner’s menu structure. To find
information about a particular menu setting in this
manual, go to the page number shown in parentheses
next to the setting.
Note: Not all of the options shown in this table may
appear at the same time. To view all available options
on any screen, rotate the scroll control.
Menu Item Submenu
Menu
Menu
Menu
-- M E N U --
Srch/CloCall Opt
Search for ...
Program System
Select System
New System
(32)
-- M E N U --
Search for ...
Program System
Srch/CloCall Opt
Srch/CloCall Opt
Srch/CloCall Opt
Broadcast Screen
CTCSS/DCS Search
Max Auto Store
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
(55) (72)
Freq Lockouts (70)
(71)
(16)
(72)
(74)
(73)
(73)
(74)
Air Band Step (75)
-- M E N U --
Search for ...
Program System
Srch/CloCall Opt
Search for ...
Srch/CloCall Opt
Edit Service
Custom Search
Edit Custom
Search and Store
Service Search (59)
(62)
(61)
(60)
(63)
Using the Menu