Uniden BEARCAT UBC3500XLT - Manual (Page 40)

40
Pressing any key while the backlight is on extends the
backlight period. Pressing
while the backlight is on
turns off the backlight.
Setting the Audio AGC
Settings
Set Audio AGC
This setting helps balance the audio level you hear as
you listen to different radio sources so you can hear
them at a similar volume. Use this setting if you listen
to an audio source that has natural changes in audio
level for which you want to compensate.
• On Press the scroll control to select. Audio AGC is
turned on.
• Off Press the scroll control to select. Audio AGC
is turned off.
Adjusting the Display Contrast
Settings
Adjust Contrast
Contrast 1 - 15 the scanner adjusts the display to
the contrast level you select.
This setting controls the display’s contrast (how light
or dark it appears). Use this setting to change the
contrast for different viewing conditions. There are 15
contrast settings. You see the change in contrast as
you scroll through the settings.
Initializing the Scanner’s Memory
1. Turn off the scanner.
2. Press 2, 9, and Hold while turning on the scanner.
All Memory Clear Please Wait appears.
Connecting Your Scanner to a
Personal Computer
To connect your scanner to a personal computer, you
must first set the scanner’s baud rate (the rate at
Menu
Menu