Uniden BEARCAT UBC3500XLT - Manual (Page 46)

46
Programming/Editing Optional Set- tings This section details the instructions for each of the
optional programming steps referred to in
“Programming Radio Systems” on Page 43. Use the
instructions in the appropriate section to enter or edit a
setting.
System-Level Settings
Editing the System Name
Program System
Select the system
Edit Name
To enter a letter, turn the scroll control until the
character you want appears. To enter a decimal point,
press . To move the cursor to the left, press /4 or
hold
and rotate the scroll control to the left.
To move the cursor to the right, press 6/ or hold
and rotate the scroll control to the right.
To clear a character, press twice. To clear all
characters, press 3 times.
To accept an entry, press E or press down on the scroll
control.
Hints:
• Each system name can be up to 16 characters.
Abbreviate as necessary to fit.
Editing the System Quick Key
Program System
Select the system
Edit Sys Option
Set Quick Key
After selecting this option, select any number from
1-99 to assign the system to a quick key or press to
assign the system to no quick key, then press E.
Menu
Func
Func
Menu
Programming/Editing Optional Settings