Uniden BEARCAT UBC3500XLT - Manual (Page 73)

73
Search and Close Call Options
This setting controls the modulation type used for
quick search and Close Call operations. Select your
setting, then press the scroll control.
Auto Uses the default setting for the current
frequency (see the table at the front of the manual)
AM Uses AM (amplitude modulation)
FM Uses FM (frequency modulation)
NFM Uses narrowband FM
WFM Uses wideband FM
WFM (Broadcast) Uses WFM Broadcast.
Setting Attenuation
Srch/CloCall Opt
Set Attenuator
This setting controls the attenuator for quick search
and Close Call operation. Select your setting, then
press the scroll control.
On Reception is attenuated by about 25 dB.
Off The attenuator is off.
Note: Turn on this setting if you are near other strong
signal sources. Attenuation sometimes helps to
reduce interference and desensitization that strong
signals create.
Setting Data Skip
Srch/CloCall Opt
Set Data Skip
This setting controls how the scanner behaves when it
stops on a channel that has a data signal.
On - the scanner stops briefly on the channel, but then
immediately resumes scanning automatically.
Menu
Menu