Ultimate Technology 500 POS - Manual (Page 42)

34
3. At the Series 500 Keyboard, press the key to be programmed.
4. At the auxiliary keyboard, press and hold the "A" key.
5. At the Series 500 Keyboard numeric keypad, enter 1.
6. At the auxiliary keyboard, release the "A" key.
7. At the Series 500 Keyboard, press ENTER to complete programming of the key.
8. Repeat steps 3 through 7 to program another key.
9. To exit the programming mode, enter 00 99 at the Series 500 Keyboard numeric keypad.
EXAMPLE 2.
This example programs the Series 500 Keyboard to start repeat mode of key using the "A" key.
1. Place the Series 500 Keyboard in local programming mode.
2. At the Series 500 Keyboard numeric keypad, enter 00 or 01.
3. At the auxiliary keyboard, press and hold the "A" key.
4. At the Series 500 Keyboard numeric keypad, enter 2.
5. At the auxiliary keyboard, release the "A" key.
6. At the Series 500 Keyboard, press ENTER to complete programming of the key.
7. Repeat steps 3 through 7 to program another key.
8. To exit the programming mode, enter 00 99 at the Series 500 Keyboard numeric keypad.
EXAMPLE 3.
This example programs a Sec Op Key on the Series 500 Keyboard.
1. Place the Series 500 Keyboard in local programming mode.
2. At the Series 500 Keyboard numeric keypad, enter 00 or 01.
3. At the Series 500 Keyboard, press the key to be programmed.
4. At the Series 500 Keyboard numeric keypad, enter 6 (Sec Op) or 7 (Sec Op Lock).