Ultimate Technology 500 POS - Manual (Page 43)

35
5. At the Series 500 Keyboard, press ENTER to complete programming of the key.
6. Repeat steps 3 through 5 to program another key.
7. To exit the programming mode, enter 00 99 at the Series 500 Keyboard numeric keypad.
EXAMPLE 4.
This example erases the macro from the primary and/or secondary key position on the Series 500
Keyboard.
1. Place the Series 500 Keyboard in local programming mode.
2. At the Series 500 Keyboard numeric keypad, enter 00 (for primary keys) or 01 (for secondary
keys).
3. At the Series 500 Keyboard, press the key to be erased.
4. At the Series 500 Keyboard numeric keypad, enter 9.
5. Repeat steps 3 and 4 to erase another key.
6. To exit the programming mode, enter 00 99 at the Series 500 Keyboard numeric keypad.