Ultimate Technology 500 POS - Manual (Page 52)

44
Table 5. Remote Programming Mode Commands - Continued
OP
CODE
(HEX)
MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT
AF COMMENT
Use when notes or comments are
to be placed in the download file.
All data is ignored up to the
carriage return <CR>.
COMMAND: AFxxxx-xxxx<CR>
AF
= Op Code
xx = Comments
<CR> = terminate command (0D hex)
ACKNOWLEDGEMENT: NONE
B0 LIGHT
Provides on/off control for keyboard
light emitting diode (LED)
indicators. PC mode for NUM and
CAP Lock lights is default.
COMMAND: B0Lx<CR>
B0
= Op Code
L = lamp
x = on/off
<CR> = terminate command (0D hex)
L: 0, 1, 2, 3, P in ASCII, where 0 = all. P
is used for PC emulation of NUM and
CAPS Lock
x:
PC mode
1 = on; 0 = off
ACKNOWLEDGEMENT: NONE