U-Line CLRCO2075 - Manual (Page 15)

13
3. For recessed installations, allow
extra water supply and drain
line length to provide slack
for easy removal from the
recessed area (Figure 8). This
will also safeguard against
kinking the line.
NOTE
After completing the installation, turn on the water and
recheck water and drain connection for leaks. Apply addi-
tional tightening if needed. DO NOT use thread sealing
compound or tape.
4. Plug in the power cord.
5. Gently push the unit into position. If desired the unit may be
recessed into cabinet or wall.
CLRCO005
Figure 8
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 13