U-Line CLRCO2075 - Manual (Page 18)

16
User’s Manual
1. Remove top hinge screw pin
(7/64" Allen wrench) from
cabinet (Figure 13). Remove
door by tilting forward and
lifting off bottom hinge pin.
Figure 13
2. Remove plastic screw plugs
(3 each, top and bottom)
from new hinge location. Do
not discard (Figure 14).
Figure 14
3. Remove top hinge (3 screws),
reinstall hinge screw pin, and
remount on opposite side
BOTTOM (Figure 15).
Figure 15
4. Remove the two door closers
from the existing bottom hinge
and install as shown on the
new bottom hinge location
(Figure 16).
Figure 16
UL312
DOOR
CLOSERS
BOSS
UL313
HINGE
SCREW
PIN
UL308
SCREW
PLUGS
UL310
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 16