Video formats and modes, Format 0 / format 1 / format 2, Format 7 – Unibrain 830 User Manual

Page 69

Advertising
background image

Unibrain Fire-i 530/630/830 Operation Manual

Page 63

6.

Video Formats and Modes

IIDC 1.31 defines several video formats which determine the video data output from the camera. An overview of

those formats is:

Format 0: Video formats up to VGA (640 x 480) resolution.

Format 1: Video formats for SVGA (800 x 600) and XGA (1024x768) resolution.

Format 2 : Video Formats for SXGA or higher resolutions ( 1280 x 960 and 1600 x 1200 )

Format 6 : Still Images

Format 7 : Scalable images sized ( User defined size and position )

Format 0 / Format 1 / Format 2

In these formats, the frame rates are pre-defined for each video mode as per the IIDC specification.

There are several defined modes for each format where a mode specifies the size and color information of the

pixels. By reading the inquiry register of the camera, the user may determine which frame rates are supported by

the camera. Please refer to the IIDC specification for the details.

Format 7

Format modes 0, 1, & 2 were defined at the early stage of the design and development of digital industrial

cameras; where cameras supported these common VESA compliant resolutions. Because the user required a flexible

and definable format; camera manufacturers utilized the user definable Format 7 to meet this demand. Format 7

is extremely flexible and allows the user to define the width, height, position and pixel format of the video data

where separate sets of control registers exists for each Format 7 mode.

The cameras support Format 7 modes 0,1,2 with the following base address:

Format 7 Mode 0 : F1F00000h Format 7 Mode 1 : F1F00100h Format 7 Mode 0 : F1F00200h

Offset

Name

Description

000h

MAX_IMAGE_SIZE_INQ

Maximum Horizontal / Vertical pixel number

004h

UNIT_SIZE_INQ

Horizontal and Vertical unit pixel number

008h

IMAGE_POSITION

Left / Top position of requested image region (pixel)

00Ch

IMAGE_SIZE

Width / Height of the requested image region (pixel)

010h

COLOR_CODING_ID

Color coding ID from COLOR_CODING_INQ register

014h

COLOR_CODEING_INQ

Inquiry register for color information setting

034h

PIXEL_NUMBER_INQ

Pixel number per frame

038h

TOTAL_BYTE_HI_INQ

Higher quadlet of total bytes of image data per frame

03Ch

TOTAL_BYTE_LO_INQ

Lower quadlet of total bytes of image data per frame

040h

PACKET_PARA_INQ

Unit (Minimum) bytes per packet Multiple by 4
Maximum bytes per packet Multiple by UnitBytePerPacket

044h

BYTE_PER_PACKET

Packet size, Recommended bytes per packet. If this value is
zero, shall ignore this field.

Please refer to the IIDC specification for the details.

NOTE: In Format 7 Mode, frames rates may vary which may depend on Size, Color, and Maximum byte per packet,

shutter and system performances.

Advertising
This manual is related to the following products:

530, 630