Univex ProSafe WFS709TP - Manual (Page 20)

WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
1-8 Introduction
v1.0, May 2007
You can manually determine the locations for APs, or use a Web browser to access the
switch’s built-in RF Plan tool and perform the following tasks:
• Define the physical site parameters.
• Determine how many access points are needed and where they should be located.
• Simulate network failures and recovery characteristics, and adjust placement if necessary.
4. Physical installation of the Wireless Access Points
Refer to the document Installation Guide: WFS709TP ProSafe Smart Wireless Switch and to
the documentation included with your access points.
5. Advanced configuration of the WFS709TP ProSafe Smart Wireless Switch
Configuration requires someone who understands the company’s network and has experience
managing routers, switches, servers, and clients. The following tasks are involved:
• Configure the planned network features via the Web interface.
• Test and verify the deployment.
The WFS709TP ProSafe Smart Wireless Switch Software Administration Manual provides
information and examples of the switch’s more advanced features.