Univex ProSafe WFS709TP - Manual (Page 26)

WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
2-6 Installing the Chassis
v1.0, May 2007
Connecting Power
1. Make sure you understand the procedure and all precautions.
Before beginning, read the entire procedure. Make sure you understand all the precautions in
these steps, as well as those listed on
page 2-2 .
2. Make sure that your site’s electrical system is compatible with the WFS709TP. See
Appendix B, “Specifications” .
Figure 2-2
Warning: This procedure should be performed by a trained technician.
Note: Use of a power line conditioner or Uninterruptible Power Supply (UPS) can
decrease or mitigate problems caused by power service fluctuations. Make sure
that the output of any power shaping device is compatible with the WFS709TP
power supplies.