Univex ProSafe WFS709TP - Manual (Page 22)

WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
2-2 Installing the Chassis
v1.0, May 2007
During installation, you will need a Phillips or cross-head screwdriver.
Precautions
Observe the following precautions during installation:
• Hazardous energy is always present while the WFS709TP is plugged into an electrical outlet.
Remove all rings, jewelry, and other potentially conductive material before working with this
product.
• Never insert foreign objects into the chassis or any other component, even when the
WFS709TP is unpowered or unplugged.
• Main power is fully disconnected from the WFS709TP by unplugging the power cord from the
power outlet. For safety reasons, verify that the power outlet and plug are within easy reach of
the operator.
• Do not handle electrical cables which are not insulated. This includes any network cables.
• To minimize electrical hazard, keep water and other fluids away from the product.
• Comply with electrical grounding standards during all phases of installation and operation of
the product. Do not allow theWFS709TP chassis, network ports, power source, or mounting
brackets to contact any device, cable, object, or person attached to a different electrical
ground. Also, never connect the device to external storm grounding sources.
• Installation or removal of the chassis must be performed in a static-free environment. The
proper use of anti-static body straps and mats is strongly recommended.
• Do not ship or store this product near strong electromagnetic, electrostatic, magnetic, or
radioactive fields.
• Do not disassemble the chassis. This product has no internal serviceable parts. When service
or repair is needed, see
“Technical Support” on page ii .
Note: There should be another person available to help position the chassis.