Uniden BCD996T - Manual (Page 102)

102
Call mode and stores any Close Call hits, up to the maximum you specified in the
Max Auto Store setting. If the scanner stores more hits than this setting, it stops
auto store operation.
Turn the Scroll Control to display an option, then press F .
Set CC Mode — Lets you select the Close Call mode. If you set CC Pri, then
every 2 seconds the scanner switches the filter settings to the ones set by the CC
Bands option. This does not occur with CC DND.
Off — Close Call is turned off for all modes.
CC DND (Do Not Disturb) — The scanner checks for a Close Call hit every 2
seconds only if the scanner is not currently stopped on a transmission. If the
scanner is on a transmission the scanner waits until the signal ends to perform a
Close Call check. This prevents breaks in audio during Close Call checks.
CC Pri (Priority) — Checks for a Close Call hit every 2 seconds.
Set CC Override — Lets you select how the Close Call feature works with other
scanning activities. If you turn this option off, when the scanner detects a Close
Call signal, CC Found! Press Func Key appear for the time you set in Set CC
Pause. Press
F when this appears to jump to and hold on the frequency.
If this option is turned on, the scanner overrides the current channel and goes to
the Close Call hit. The scanner displays CC Found! Press Any Key. When you
press a key, the frequency appears.
Set CC Alert — Lets you select how the scanner alerts you when it receives a
Close Call signal. You can select from these options.
Select Beep — The scanner beeps when it receives a Close Call signal. You
can set the beep alert in the following manner.
Off — the scanner does not beep
Alert 1-9 — The scanner sounds a specialized beep to notify you of a Close
Call hit. When you select an alert type, the scanner automatically enters the setting
of the Alert volume level. Each alert has a unique one or sound pattern.
Set CC Pause — Lets you select how long the scanner waits after a hit before it
returns to the previous operation. Your options are:
3/5/10/15/30/45/60 sec.
Infinite — The scanner stops and requires you to manually select another
operation to enable its return.