Uniden BCD996T - Manual (Page 125)

125
Using the BCD996T with a GPS
Location to be deleted F
Delete Location F
Confirm Delete? Yes=”E” / No=”.” F
Make your choice to either delete the location or to cancel.
GPS Display Mode
Press [GPS], to switch the scanner to a GPS display mode. In this mode, you can
see location information as well as information about your position relative to the
selected POI. The third line of the screen shows Off if no POI is selected.
Rotate the Scroll Control to select different POI’s.
Press F + [GPS] to toggle the Display mode in order.
GPS DATA Display ETA Display Clock Display
Elevation Display Speed Display Location Display
The BCD996T, a GPS, and a Dangerous Road
Car One is driving south. Car Two is driving
east. Car One is alerted since the Latitude
and Longitude of the Dangerous Road is
programmed as well as the Range and the
Direction. When all three conditions are
met, the alert sounds. Since Car Two is
going east, no alert sounds.
Car Two
Car One
41° 17’ 58.64” N
74°11’ 10.30” W
Heading South
Programmed Settings