Uniden BCD996T User Manual
Page 87
87
Programming Your Scanner
Select a channel group
F
Edit Channel
F
Select the channel
F
Edit TGID
F
To edit the Talk Group ID, enter the Talk Group ID you want using the number
keys. Then press
F
.
For each channel, you can select the audio type that the channel receives.
[MENU]
Program System
F
Select the system
F
Edit Group
Select the channel group
F
Edit Channel
F
Select an existing channel
F
Set Audio Type
F
Select from All, Digital Only, Analog Only
F
All — The scanner automatically determines whether the audio is analog or
digital.
Digital Only — The scanner only remains on the channel if it is carrying APCO
25 digital audio
Analog Only — The scanner only remains on the channel if it is carrying analog
audio.
If you are programming a conventional system and select Analog Only, the
scanner prompts you to select the CTCSS/DCS tone setting. See the next section.
To program a channel with a CTCSS or DCS setting, your conventional system
audio must be set to Analog Only first.
[MENU]
Program System
F
Select the system
F
Edit Group
F
Select the channel group
F
Edit Channel
F
Select the channel
F
Setting the Audio Type
MECL
Selecting CTCSS/DCS Tones
C