VTech DECT 6.0 LS6375-3 - Manual (Page 25)

Telephone settings
21
Key tone
You can turn the key tone on or off.
Press MENU/
SELECT
when the handset is not in use.
Press /
VOL
or
VOL
/
CID
to highlight > Settings, then
press
MENU
/SELECT.
Press /
VOL
or
VOL
/
CID
to highlight > Key tone, then
press
MENU
/SELECT.
Press /
VOL
or
VOL
/
CID
to choose > On or >Off.
Press
MENU
/SELECT to confirm your selection. You
hear a confirmation tone.
Set date/time
The answering system announces the date and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so
that the day of the week can be calculated from the caller ID information. You
can also turn off the date and time settings of the caller ID service and use
your own settings for each incoming call (see CID time synchronization on
page 22).
Press MENU/
SELECT
when the handset is not in use.
Press /
VOL
or
VOL
/
CID
to highlight > Settings, then
press
MENU
/SELECT.
Press /
VOL
or
VOL
/
CID
to highlight > Set date/time,
then press
MENU
/SELECT.
Press
MENU
/SELECT to highlight >Date & time.
When the month is flashing, press /
VOL
or
VOL
/
CID
until the screen displays the correct month and then
press
MENU
/SELECT; or, press the dialing keys (0-9)
to enter the current month (for example, if the month is
March, you must enter 03).
Repeat step 5 to set the correct date and year and then
press
MENU
/SELECT to advance to time setting.
When the hour is flashing, press /
VOL
or
VOL
/
CID
until the screen displays the correct hour and then press
MENU
/SELECT; or, press the dialing keys (0-9) to enter
the current hour (for example, if the time is two o’clock,
you must enter 02).
Repeat step 7 to set the correct minute. When AM or
PM is flashing, press /
VOL
or
VOL
/
CID
to choose AM
or PM. Press
MENU
/SELECT when finished. You hear a
confirmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
>Key tone
Set date/time
KEY TONE
>On
>Set date/time
Home area code
SET DATE
03/25/10
SET TIME
02:45 AM
>Date & time
CID time sync
If the date and time are not set when a message is recorded, the system
announces, “ Time and date not set,” before each message plays.