Telephone base and handset charger installation, Telephone base and handset, Charger installation – VTech DECT 6.0 LS6375-3 User Manual

Page 6: Getting started

Advertising
background image

Telephone base and handset charger installation

Install the telephone base and handset charger as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service

through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack. The filter prevents noise and

caller ID problems caused by DSL interference. Contact your DSL service

provider for more information about DSL filters.

Telephone base

Telephone

wall jack

Handset charger

Use only the power adapters supplied with this product. To order a

replacement, visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Getting started

Electrical outlet

not controlled by

a wall switch

If you have DSL

high speed

Internet service,

a DSL filter (not

included) is

required.

Telephone

line cord

Telephone

base power

adapter

Handset

charger

adapter

2

Advertising
This manual is related to the following products: