VTech DECT 6.0 LS6375-3 - Manual (Page 40)

36
Telephone operation
End PTT
For one-to-one PTT, both initiating and destination handsets can end PTT.
For one-to-all PTT, the initiating handset can end the PTT call for all handsets
on the PTT call. If any one of the destination handsets leaves the PTT call, the
call continues until all participants or the initiator hangs up.
To end or leave PTT:
Press
OFF/
CLEAR
or place the handset in the telephone base or charger. The
handset displays Push to talk Ended.
Answer an incoming call during PTT
When you receive an incoming outside call during PTT, there is an alert tone.
During a one-to-one PTT, press /
FLASh
on the initiating or destination
handset. The PTT call ends automatically and the outside call is answered.
During a one-to-all PTT, press /
FLASh
on the initiating handset. The PTT
call ends automatically and the outside call is answered.
During a one-to-all PTT, press /
FLASh
on any one of the destination
handsets and that handset answers the outside call. The PTT call continues
for the rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/
CLEAR
. The telephone continues to ring.
•
•
•
•
After PUSh TO TALK is released, the PTT call remains open for a short
time. If no one presses PUSh TO TALK within 10 seconds, the PTT call
ends automatically.
Make an outgoing call during PTT
During a one-to-one PTT, press /
FLASh
to get a dial tone. The PTT call
ends automatically.
During a one-to-all PTT, press /
FLASh
on the initiating handset. The PTT
call ends automatically and you get a dial tone.
During a one-to-all PTT, press /
FLASh
on any one of the destination
handsets and that handset gets a dial tone. The PTT call continues for the
rest of the PTT participants.
•
•
•