VTech 912 - Manual (Page 12)

12
• Press the OFF key to exit all modes
of operation.
MEM KEY
• P r e s s t h e M E M k e y t o e n t e r
MEMORY mode.
• The sequence for dialing out a speed
dial number in memory is: PHONE,
MEM, Number Button (0-9).
PROG KEY
• Press PROG key to enter
PROGRAM mode. See
P r o g r a m m i n g S p e e d D i a l
Numbers for more details.
REDIAL KEY
• When you hear the dial tone,
pressing the REDIAL key will dial out
the last number that was called on
your phone.
• It can also be used to store the last
number dialed into the speed dial
memory. See Storing a Redial
Number into Speed Dial for details.
TONE/ KEY
• In PULSE dialing mode, this key is
used to switch to Temporary TONE
dialing mode.
VOLUME CONTROL SWITCH
• There is a volume control switch on
the side of the handset. Set the
switch in either the high (H) or low
(L) position, depending on your
preference.
HANDSET FEATURES
IN USE LED
• The IN USE LED lights when the
phone line is being used by the hand-
set.
• It flashes in cadence with an incom-
ing ring.
• It flashes quickly during PROG
mode.
LOW BATTERY LED
• The Low Battery LED will flash
when the handset battery is getting
low and needs to be recharged.
PHONE KEY/FLASH FUNCTION
• Press the PHONE key to make a call.
• If you are currently on a call pressing
PHONE flashes the line. This would
be used with a feature like call wait-
ing to answer your second call.
CHANNEL KEY
• Pressing the CHAN key when the
handset is in use will activate a chan-
nel change to the next free channel.
• This is used if you are experiencing
noise or interference on the current
channel.
OFF KEY
900 MHz CORDLESS
IN USE LOW
BATT
PHONE CHAN OFF
2 ABC 1 D E F 3
4 G H I J K L 5 MNO 6
P R S 7 T U V 8 W X Y 9
TONE * 0 OPER #
MEM PROG REDIAL