Common cure for electronic equipment – VTech 912 User Manual
Page 27
27
YOU HEAR NOISE IN THE HAND-
SET, AND NONE OF THE KEYS OR
BUTTONS WORK.
• Make sure the power cord is plugged
in.
• Your base unit and handset may not
be operating on the same channel
or security code. Place the handset
in the cradle for a few moments to
reload the security code and reset
the channel.
COMMON CURE FOR ELECTRONIC
EQUIPMENT
E l e c t r o n i c s , l i k e p e o p l e , c a n
sometimes get confused. If the unit
does not seem to be responding
normally, then try putting the handset
in the cradle to re-initialize the unit. If
it still does not seem to respond,
perform the following steps (in the order
listed):
1.
Disconnect the power to the base.
2.
Disconnect the handset battery.
3.
Wait a few minutes.
4.
Connect power to the base.
5.
Connect the handset battery.
6.
Put the handset in the base to re-
initialize.
IN CASE OF DIFFICULTY