VTech 912 - Manual (Page 24)

24
CALLER ID
Deleting Caller ID Memory
While in Caller ID review mode, the
calling party’s name and telephone
number are displayed on the LCD. If
you wish to delete an individual call
from Caller ID memory, press the DEL
key twice within 1.5 seconds. This will
delete a single entry only.
If you want to delete the entire Caller
ID memory, press and hold the DEL
key for 6 seconds.
Manual Reset
Should you encounter any difficulties,
you can perform manual reset. Just
press and hold those 3 keys ( DEL,
and ) continuously for 6 seconds.
The unit will be reset to initial setup
state. Also, if there is a POWER failure
for a long period of time, the unit will
also reset to initial setup state.
In both cases, all previous CID
information will be erased.
ENTER LANGUAGE
ENG ESP FRA
ENTER TIME DATE
NO CALL
END OF RCV
PRIVATE
UNAVAILABLE
LINE ERROR
The following table is the language cross reference which shows all the
messages given by the CALLER ID.
ENGLISH SPANISH FRENCH
? TIEMPO FECHA
NO LLAMADA
FIN DE REC
LLAMADA ANONIMA
INDISPONIBLE
LINEA ERRONEA
? HEURE DATE
AUCUN APPEL
FIN RECEPTION
PRIVE
INDISPONIBLE
ERREUR LIGNE