VBrick Systems VBRICK APPLIANCE VB6000 - Manual (Page 140)

130 © 2008 VBrick Systems, Inc.
c nt 6 xxx To edit the IP Host Name. The default
is the Media Access Control (MAC)
address, a hardware address that
uniquely identifies each node of a
network. The Host Name can be a
maximum of 18 characters; the
first character must be a letter and
the last character a number. The
middle characters can be letters,
numbers or hyphens.
c nt a
Apply the changes Must be issued prior to save.
c nt 2
yy.yy.yy.yy
To edit the IP address Where yy.yy.yy.yy is the new IP
address.
c nt a
Apply the changes Must be issued prior to save.
c nt 3
zz.zz.zz.zz
To edit the Sub Net Mask Where zz.zz.zz.zz is the new
subnet mask associated with the
Ethernet interface.
c nt a Apply the changes Must be issued prior to save.
c nt 4
vv.vv.vv.vv
To edit the IP Gateway address Where vv.vv.vv.vv is the IP address
of the IP gateway.
c nt a
Apply the changes Must be issued prior to save.
c nt 1 Displays the IP parameters
s ui m 1 Displays Board User Information. The User Information contains the
part number and Ethernet MAC
address of the VBrick.
Command Description Entry