VBrick Systems VBRICK APPLIANCE VB6000 - Manual (Page 66)

56 © 2008 VBrick Systems, Inc.
(unlike the Microsoft encoder). See Creating Publishing Points and Creating Publishing
Points on Helix Universal Servers for more information.
When configuring for multiple bit rates, any combination of video, audio, or script streams
can be pushed to a reflector server. The server can then reflect multiple bit rates so that
clients connecting to the publishing point can negotiate and select optimum values. Only
those audio/video rates that are enabled on the Configuration: Encoder > Video are
selectable. By default only
Video Rate1
,
Audio Rate1
, and
Include Closed Caption and Meta
Data
are enabled on the Push page, but you can select additional audio/video rates to send
multiple bit rate streams to a Microsoft Windows Media Server. Since a VBrick reflector
cannot serve multiple bit rates, you would typically select only a single video rate and a single
audio rate when pushing to a VBrick.
Maximum Push
Destinations Maximum number (1–25) of destinations for the pushed stream.
Default = 1. Note that the
Maximum Push Destinations
plus the
Max. Allowed Clients
(on the Configuration: Encoder > Server
page) cannot exceed 202.
Include Video Rate1,
VideoRate2, Video Rate3 Default = Enabled. Select additional video rates to send MBR to
a Microsoft Windows Media server.
Include Audio Rate1,
AudioRate2, Audio Rate3 Default = Enabled. Select additional audio rates to send MBR to
a Microsoft Windows Media server.
Include Closed
Caption and Metadata Default = Enabled.
Enable Use to enable HTTP Push. Default = Disabled.