VBrick Systems VBRICK APPLIANCE VB6000 User Manual
Page 89
WM Configuration
VBrick WM Appliance Admin Guide
79
Table 14. Trap Summary Tables
DNS Host Name
Complete if Host Type = DNS Host Name.
SNMP Trap Version
Select Version number.
Trap User Name
Authentication Password Enter password. Cannot exceed 20 characters. May include any
combination of alphanumeric characters but only the following
special characters:
~ ! # $ ^ * + & % [ ] { } | < >
See Table 15 on
page 125 for defaults.
Authentication Protocol
Select protocol: MD5 or SHA to validate the transaction
between a given host and client
Privacy Password
Required. Hides traffic using DES encryption.
Security Level
No Authentication, No Privacy (default).
No Privacy.
Authentication and Privacy.
Number Event Description
1
There is loss of video input on slot1 Encoder.
2
The loss of video input on slot1 Encoder failure has cleared.
3
There is loss of video input on slot2 Encoder.
4
The loss of video input on slot2 Encoder failure has cleared.
5
The box has started up in Run mode.
6
The box has started up in Diagnostics mode.
7
The box has started up in Limited Run mode.
8
The box has received a reset request from an administrator.
9
There is a fan failure.
10
The fan failure is recovered.
11
The temperature of the unit is out of range. Will be sent when the unit's internal
temperature becomes too high or too low.
12
The temperature out of range condition has cleared.
13
The 24 volts power supply failed.
14
The 24 volts power supply failure has cleared.
15
The 12 volts power supply failed.
16
The 12 volts power supply failure has cleared.
17
The 5 volts power supply failed.
18
The 5 volts power supply failure has cleared.
19
The 3.3 volts power supply failed.
20
The 3.3 volts power supply failure has cleared.