Vivotek IP7138 - Manual (Page 25)

z Set the appropriate delay time to avoid continuous false alarms following the
original event
z Check the server name set in Step 10 and select the media name set in Step
11.
13.Click on save to validate.
Software revision upgrade
Customers can obtain the up-to-date software from the web site of Vivotek. An
easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a
few clicks. The upgrade function is opened to the Administrator only. To upgrade the
system, follow the procedures below.
1. Download the firmware file named “xxx.pkg” from the appropriate product folder.
2. Run the Installation Wizard and proceed following the prompts. Refer to the
instructions of the Installation Wizard for details.
3. Or upgrade firmware from HTTP web page directly
3. The whole process will finish in a few minutes and it will automatically restart the
system.
If power fails during the writing process of Flash memory, the program in the
memory of the Network Camera may be destroyed permanently. If the Network
Camera cannot restart properly, ask your dealer for technical service.
User's Manual - 24
VIVOTEK - A Leading Provider of Multimedia Communication Solutions