Vivotek IP7138 - Manual (Page 47)

Event
“Event name” The unique name for event
“Enable this event” Check it to enable this event.
“Priority” The event with higher priority will be executed first.
“Delay second(s) before detecting next event” The delay to check next event. It
is used in motion detection and digital input trigger type.
There are four kinds of trigger supported.
“Video motion detection” Select the windows which need to be monitored.
“Periodic” The event is triggered in specified intervals. The unit of trigger interval is
minute.
“Digital input” To monitor digital input
“System boot” The event is triggered when the system bootup.
The weekly and time schedules are provided.
“Sun” ~ “Sat” Select the days of the week to perform the event.
“Time” show “Always” or input the time interval.
The default action are triggering DO and storing media on CF card. If there are servers
configured, the user can select them from “Server name”, too.
“Trigger DO” Check it to trigger digital output for specific seconds when event is
triggered.
“CF” Check it to storing media on CF. Please select the media and set folder.
“Server name” Check it to sending the selected media when event is triggered.
User's Manual - 46
VIVOTEK - A Leading Provider of Multimedia Communication Solutions