Vivotek IP7138 - Manual (Page 52)

Recording
The Network camera supports recording on CF and network storage. The operation of
editing recording item is the same as the one in application page. User can know the
recording name, status, weekly and time schedule, stream source and destination of
recording. There can be at most two recording entries. To do recording on network
storage, please add network storage server in application page first.
“Time” shows “Always” or input the time interval.
“Destination” CF or network storage server user added.
“Folder” The folder to put recording files. It is only used by CF.
“Total cycle recording size” The total size for cycle recording in Kbytes
“Size of each file for recording” The single file size in Kbytes
“File name prefix” The prefix name will be added on the file name of the recording.
51 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
<url> http://<Network Camera>/setup/recording.htm
<Network Camera> is the domain name or original IP address of the Network Camera.
“Recording entry name” The unique name for recording entry
“Enable this recording” Check it to enable this event.
“Priority” The recording with higher priority will be executed first.
“Source” The source of stream, stream1 or stream2.
The weekly and time schedules are provided.
“Sun” ~ “Sat” Select the days of the week to perform the event.