Vivotek IP7138 - Manual (Page 57)

Maintenance
This chapter explains how to restore the Network Camera to factory default,
upgrade firmware version, etc.
"Reboot" Click this button to turn off and turn on the Network Camera. It takes
about one ~ two minutes to complete the process. When completed, the live video
will be displayed in your browser. The following message is displayed during the
rebooting process.
If the connection fails after rebooting, manually enter the IP address of the
Network Camera in the address field to resume the connection.
"Restore" Click this button to restore the Network Camera to factory default. Two
settings can be excluded:
● Network Type : Select this option to retain the Network Type settings.
● Daylight Saving Time : Select this option to retain the Daylight Saving Time
settings.
If none of the options is selected, all settings will be restored to factory default.
The following message is displayed during the restoring process.
"Upload / Export Daylight Saving Time Configuration File" This feature
allows you to set the starting time and ending time of DST.
In the Export Daylight Saving Time Configuration File Column, click Export to
export an Extensible Markup Language (*.xml) file from the Network Camera.
User's Manual - 56
VIVOTEK - A Leading Provider of Multimedia Communication Solutions