VTech Cordless Telephone - Manual (Page 16)

16
Basic Operation
Telephone Memory
3. Press SELECT. The screen displays ERASE NO YES and the number. The
current choice flashes.
4. Press until YES flashes.
5. Press SELECT. You will hear a confirmation beep.
Dial a Memory Number
1. Press and hold the memory location key (1-9) of the entry you wish to dial.
2. Press PHONE to dial the displayed memory number.
— OR—
Press REDIAL/PAUSE to display the last number (up to 24 digits long)
dialed from this phone.
7. Press SELECT or PROG to store your entry. The screen displays DISTINCT
RING? and the current setting.
8. Press or to change the setting. Choose Y (yes) if you wish the phone to
alert you that the calls from this number by a distinctive ringer after the first
ring. Choose N for a normal ringer.
9. Press SELECT or PROG to confirm your selection. If you chose Y in Step 8, a
D D D D D D will be displayed with the entry.
Edit a Number/Name Stored in Memory
1. Press and hold the memory location key (1-9) of the entry you wish to edit.
2. When the screen displays the entry you want to edit, press SELECT. Then
press until EDIT flashes.
SPEED EDIT ERASE
8005959511
3. Press SELECT. The screen displays the name and number. The flashing
cursor appears at the end of the name. Use , and the dial pad keys to
edit the name. Press SELECT to move on to edit the number. Use to
backspace and make corrections. Press SELECT to move on to edit the dis-
tinctive ring setting.
4. Press SELECT to save the edited information.
Delete a Number/Name Stored in Memory
1. Press and hold the memory location key (1-9) of the entry you wish to delete.
2. When the screen displays the entry you want to delete, press SELECT. Then
press until ERASE flashes.
01
SPEED EDIT ERASE ERASE ERASE ERASE ERASE
8005959511
01
91-000171-030-000 manual.pmd 11/1/2005, 12:46 PM 16