VTech Cordless Telephone - Manual (Page 9)

9
Getting Started
TEL LINE 9V DC
VTECH TELECOMMUNICATIONS LTD. DC 9V 300mA CLASS 2 POWER SOURCE ONLY
CORDLESS TELEPHONE
VTech Customer Service 1-800-595-9511 www.vtechphones.com
Installation
Connect the
power cord. Connect the telephone
line cord
Table/Desk Installation
1. Check for Dial Tone
After the batteries are charged, pick up the handset and press PHONE, you
should hear a dial tone.
2. Set Time and Date
If you subscribe to caller ID service, the date and time will be set automatically with
the first incoming call. If you do not have caller ID service, you can set the date
and time manually.
• Press PROG, and then press or until DATE/TIME is displayed. Press
SELECT.
• The month is flashing. Press or until the screen displays the correct
month. Press SELECT.
• The day is flashing. Press or until the screen displays the correct day.
Press SELECT.
• The hour is flashing. Press or until the screen displays the correct hour.
Press SELECT.
• The minute is flashing. Press or until the screen displays the correct
minute. Press SELECT.
• AM or PM is flashing. Press or to choose AM or PM. Press SELECT.
91-000171-030-000 manual.pmd 11/1/2005, 12:46 PM 9