VTech Cordless Telephone - Manual (Page 29)

29
Basic Operation
Play messages in Press #, then the appropriate mailbox a mailbox
number (1, 2 or 3). The system plays new messages.
If there are no new messages, the system plays old
messages.
Repeat a message Press #4 while message is playing; press #4#4 to
back up to previous message.
Skip a message Press #6 while message is playing to advance to
the next message.
Stop Press #5.
Save messages Hang up.
Delete message Press #9 while message is playing.
Review announcement Press #7; system plays announcement, then beeps.
Record announcement Press *7; after beep, record announcement, press
#5 to stop. System plays back announcement.
Record memo
End remote access call
Connect with the Answering System From a Remote Location
You can access many features of this system remotely from a touch tone phone.
1.
Dial your telephone number.
2. When the system answers, enter your remote access code (preset to 50).
The system beeps once and then announces the number of new messages.
3. Enter a remote command (see Remote Access Commands).
4. Press * 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press *5 to
hear the menu while remotely connected to the answering system.
Remote Access Commands
Function: Command:
Answering System Operation
Press *8, then mailbox number where you want
memo recorded; speak after the beep; press #5 when
finished.
Press *0.
a mailbox
91-000171-030-000 manual.pmd 11/1/2005, 12:46 PM 29